Design House 519256 Guide d'installation télécharger pdf

ASSEMBLY INSTRUCTION

SKU#511774/519256

NOTE: Please consult a qualified electrician if you are not certain of the installation.

CAUTION: Before starting the installation or service, disconnect the power by turning off the circuit break or

removing the fuse at the fuse box.

1. Carefully unpack the fixture, lay out all parts on a clean surface.

2. Attach the cross bar to the outlet box using provided outlet box screws.

3. Tie ground wire from outlet box and from fixture to the ground screw on the cross bar. Connect white wire

from fixture to white wire (neutral wire) from supply circuit. Connect black wire from fixture to black wire

(live wire) from supply circuit. Cover connections using provided wire connectors.

4. Place the fixture body against wall by aligning the protruding mounting screws all the way through the wall

plate and tighten lock nuts and washers to the mounting screws until the fixture body is held firmly against the

wall.

5. Unscrew the socket rings from the sockets. Place shades over sockets, and reattach socket ring to socket to

secure shade.

6. Install the bulbs (sold separately).

7. Reconnect the power.

ASSEMBLY INSTRUCTION 1

Résumé du contenu

Page 1 - ASSEMBLY INSTRUCTION

ASSEMBLY INSTRUCTION SKU#511774/519256 NOTE: Please consult a qualified electrician if you are not certain of the installation. CAUTION: Before starti

Commentaires sur ces manuels

Pas de commentaire

Design House 519256 Guide d'installation

Naviguer en ligne ou télécharger Guide d'installation pour Non Design House 519256. Design House 519256 Installation Guide Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Non Design House 519256