Design House 519900 Manuel d'instructions télécharger pdf

KIMBALL 1LT WALL MOUNT

ASSEMBLY/INSTALLATION INSTRUCTIONS

WARNING: Risk of Fire. Min 75ºC supply conductors. Consult a qualied electrician to ensure correct

installation.

Turn off the main power at the circuit breaker before installing the xture, in order to prevent possible

shock.

#519892

#519900

Customer Service 1-800-558-8700

All electrical connections must be in accordance with local and National Electrical Code (N.E.C.)

standards. If you are unfamiliar with proper electrical wiring connections obtain the services of a

qualied electrician.

Remove the xture and the mounting package from the box and make sure that no parts are missing by

referencing the illustrations on the installation instructions.

Phillips screwdriver.

1. Gently take all parts out of the package, lay them on a smooth surface, unscrew the BALL NUTS and

the FIXTURE SCREWS. Attach the CROSS BAR to the JUNCTION BOX using (2) JUNCTION BOX

SCREWS.

2. Make wire connections with WIRE NUTS:

A - Connect the black wire from Fixture to the black supply wire.

B- Connect the white wire from Fixture to the white supply wire.

C- Attach the xture ground wire to the CROSS BAR with the green GROUND SCREW. Then connect

it to the supply ground wire with a WIRE NUT. Carefully tuck wires back into the JUNCTION BOX.

3. Attach the FIXTURE to the CROSS BAR through SCREW HOLES as shown, and secure it with BALL

NUTS.

4. Attach the SHADE onto FIXTURE using SOCKET RING.

5. Install BULB (not included). See relamping label at socket area or packaging for maximum allowed

wattage.

CAUTION

GENERAL

TOOLS REQUIRED

ASSEMBLY AND INSTALLATION

(CONT.)

Please read carefully and save these instructions, as you may need them at a later date.

Turn off the power at fuse or circuit breaker.

Turn on the power at fuse or circuit breaker.

IF IN DOUBT ABOUT ELECTRICAL INSTALLATION,

CONSULT A LICENSED ELECTRICIAN.

JUNCTION BOX

JUNCTION BOX SCREW

FIXTURE

SOCKET RING

BULB

(not included)

SHADE

BALL NUTS

WIRE NUTS

CROSS BAR

GROUND SCREW

SCREW HOLES

FIXTURE SCREWS

Item # 519892 (KIMBALL 1LT WALL MOUNT GAL)

Item # 519900 (KIMBALL 1LT WALL MOUNT BRZ)

Résumé du contenu

Page 1 - ASSEMBLY AND INSTALLATION

KIMBALL 1LT WALL MOUNT ASSEMBLY/INSTALLATION INSTRUCTIONSWARNING: Risk of Fire. Min 75ºC supply conductors. Consult a qualied electrician to ensur

Commentaires sur ces manuels

Pas de commentaire

Design House 519900 Manuel d'instructions

Naviguer en ligne ou télécharger Manuel d'instructions pour Non Design House 519900. Design House 519900 Instructions / Assembly Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Non Design House 519900