Design House 517722 Guide d'installation télécharger pdf

ASSEMBLY INSTRUCTION

Item#517722/509232

NOTE:

Please consult a qualified electrician if you are not certain of the installation or service.

CAUTION: Before starting the installation or service, disconnect the power by turning off the circuit breaker

or by removing the fuse at the fuse box.

1. Carefully unpack the fixture, lay out all parts on a clean surface.

2. Unscrew the mounting strap from the fixture.

3. Fasten mounting strap to outlet box using provided outlet box screws. (Figure 1)

4. Connect black wire from fixture to black wire (live wire) from supply circuit. Connect white wire from

fixture to white wire (neutral wire) from supply circuit. Cover connections using provided wire connectors.

Tie ground wire from outlet box and from fixture to the ground screw on the mounting strap. (Figure 2)

5. Place the fixture body against wall allowing nipple A to pass through the center hole in the wall plate, and

secure fixture to wall with lock nut.

6. Place the frame and cap over the nipple B, and then screw the finial to the nipple B to secure pieces.

(Figure 3)

7. Assemble glass shade into frame. (Figure 4)

8. Install the bulb (sold separately). (Figure 5)

9. Reconnect on the power.

ASSEMBLY INSTRUCTION Item#517722/509232 NOTE: Please consult a qualified electrician if you are not certain of the installation or service. CAUTION:

Pas de commentaire

Design House 517722 Guide d'installation