Design House 519363 Guide d'installation

Naviguer en ligne ou télécharger Guide d'installation pour Non Design House 519363. Design House 519363 Installation Guide Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 1
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
RIDGEWAY WALL MOUNT LIGHTING FIXTURES
ASSEMBLY/INSTALLATION INSTRUCTIONS
NOTE: Fixtures are suitable for up or down mounting.
1. Before beginning the installation, carefully unpack and identify all parts
referring to Figure 1. Be sure the supply power is OFF.
2. Using 2 JUNCTION BOX SCREWS, securely fasten the CROSSBAR to the
JUNCTION BOX.
3. MAKE ELECTRICAL CONNECTIONS:
(We recommend 2 people for
the remainder of installation) Connect the SUPPLY GROUND WIRE to the
FIXTURE GROUND WIRE with a wire nut and then secure it to the
CROSSBAR with GREEN GROUND SCREW. Using wire Connectors,
connect the SUPPLY WHITE WIRE(S) to the FIXTURE WHITE(or
RIBBED) LEAD(S); Connect the SUPPLY BLACK (or RED) WIRE to the
FIXTURE BLACK (or SMOOTH) LEAD(S). Wrap all connections with
approved electrical tape.
4. Place the WALL PLATE over the CROSSBAR and secure it with (2)
LOCKING BALLS.
5. Locate the GLASS SHADE(S) and pull over the SOCKET(S), Thread
SOCKET RING(S) onto end of the SOCKET(S). Hand tighten until snug.
6. Install the bulb(s) (Sold separately) referring to fixture labels for maximum
wattage. The bulb quantities depend on the style (Refer to Figure 2).
7. Restore supply power (ON). Retain this sheet for future reference.
Customer Service: 1-800-558-8700
FIGURE 1.
Lock Ball
Wire Nut
Junction Box
Cross Bar
Green Ground
Screw
Junction Box
Screw
Ground Wire
Socket
Glass
Shade
Socket Ring
Bulb (Sold
Separately)
Wall Plate
FIGURE 2.
IF IN DOUBT ABOUT ELECTRICAL INSTALLATION,
CONSULT A LICENSED ELECTRICIAN.
#519363, 519447 #519371, 519454
Vue de la page 0
1

Résumé du contenu

Page 1

RIDGEWAY WALL MOUNT LIGHTING FIXTURES ASSEMBLY/INSTALLATION INSTRUCTIONS NOTE: Fixtures are suitable for up or down

Commentaires sur ces manuels

Pas de commentaire